Modular-10
Speaker drivers
1 x 10″ Neodym woofer (LF) with 2,5″ voice coil, cone waterproof treatment
1 x 1″ Neodym compression driver (HF) with 1,7″ voice coil
System
2-way, scalable multi-functional loudspeaker
Frequency range
70 Hz – 22 kHz (- 10 dB)
107 Hz – 21 kHz (+- 3 dB)
Coverage range (h x v)
90° x 40° (arrayable and rotable horn)
Monitoring angle
50° and 20°
Impedance bi-amping
LF 8 Ω / HF 8 Ω
Powerhandling LF 8 Ω
350 W AES / 700 W programm / 1.400 W peak
Powerhandling HF 16 Ω
50 W AES / 100 W programm / 200 W peak
Sensitivity dB SPL 1 W/1 m
100 dB SPL
Sound pressure at (AES / programm / peak)
125 dB SPL / 128 dB SPL / 131 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT, 1+/- HF, 2+/- LF, passive 1+/1-
Handles
3 x shell type handle
Foot
7, each 4 x monitor site and 3 x bottom
Paveosub-115sp
Speaker drivers
1 x 15″ Neodym long excursion woofer (LF) with 4″ voice coil, cone waterproof treatment
System
compact and flat bass reflex subwoofer
Lower cut-off frequency
34 Hz (- 10 dB)
45 Hz (- 3 dB)
Coverage range (h x v)
Omnidirectional
Impedance
8 Ω active separated
Powerhandling LF 8 Ω
1.200 W AES, 2.400 W programm, 4.800 W peak
Sensitivity dB SPL 1 W/1 m
98 dB SPL (half space)
Sound pressure at (AES / programm / peak)
129 dB SPL / 132 dB SPL / 135 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT, 2+/- LF
Handles
2 x shell type handle
Foot
8, each 4 x on a flat and narrow side with opposite stacking trays
Fittings
2 x M20 pole mount
2 x latches on the front for detachable wheelboard
Housing
30 and 15 mm birch plywood CNC machine-splined and bolted
Dimensions / Weight
360 (h) x 540 (w) x 570 mm (d) / 30,4 kg
Integrated 3-Way Amplifier Modul
Amplifier
3rd Generation Class D
Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω
Power output CH2 and CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω
Amplifier gain
CH1 32 dB, CH2/3 26 dB
Signal-to-noise ratio
> 120 dB (20 – 20.000 Hz, 8 Ω)
Damping factor
> 1.000 (8 Ω, 1 kHz)
Distortion
THD+N < 0,05 % (20 – 20.000 Hz, 8 Ω)
Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors
Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz