Speaker drivers
2 x 5″ Neodym woofer (LF) with 32 mm (1,25″) voice coil
1 x 1″ Ferrit compression driver (HF) with 1″ voice coil

System
2-way, d’Appolito multi-functional loudspeaker, bass reflex

Frequency range
71 Hz – 19 kHz (- 10 dB)
139 Hz – 15,7 kHz (+/- 3 dB)

Coverage range (h x v)
70° x 55°

Monitoring angle
55° and 25°, 90° for Nearfill

Impedance
12 Ω

Powerhandling 12 Ω
200 W AES / 400 W programm / 800 W peak

Sensitivity dB SPL 1 W/1 m
92 dB SPL

Sound pressure at (AES / programm / peak)
114 dB SPL / 117 dB SPL / 120 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT (loop through), configuration: 1+/1-

Handles
1 x handle backside

Mounting
1 x Camlock for tilt and swivel multifunctional brackets. Vertical and horizontally mountable without tools
1 x single-stud mount in the metal connection panel for safety rope (bracket can be secured separately)
2 x M6 threaded points for rear, adjustable wall brackets
1 x M8 Thread point for mounting a rear crosspiece clamp using the M8 cylinder head allen screw or for mounting a Manfrotte M8 stud for a Manfrotto Super Clamp

Housing
12 – 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days.

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 5 mm acoustic foam behind grille.
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam.

Dimensions / Weight
450,5 (h) x 172 (w) x 190 mm (d) / 6 kg

Integrated 3-Way Amplifier Modul

Amplifier
3rd Generation Class D

Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω

Power output CH2 and CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω

Amplifier gain
CH1 32 dB, CH2/3 26 dB

Signal-to-noise ratio
> 120 dB (20 – 20.000 Hz, 8 Ω)

Damping factor
> 1.000 (8 Ω, 1 kHz)

Distortion
THD+N < 0,05 % (20 – 20.000 Hz, 8 Ω)

Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Integrated Loudspeaker Management System (DSP-Board)

Manual hand operation
2 button and 1 x digital encoder-wheel for the internal menu navigation, function lockable

Operable language
Selectable between English, German, France, Spain

Softwareconnection, bi-directional
USB, Ethernet

Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-amplifier in one network

Realtime software-monitoring for PC and MAC
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from the ampmodule
Real time meterbridge on PC per channel
Real time access for configuration
Speaker group building for access multiple speakers with one command
Display with software dimmable and switchable out
Standby switchable
Konfiguration und real-time monitoring über VA-WLAN Remotesoftware für PC und Mac

DSP preset memory quantity
80 Presets

Processor
64 bit, 96 kHz sample rate

Dynamic range input
120 dB

Maximum input level
+ 23 dB

Latency
0 – max. 500 microsecond

Routing
2-input signals can mix together in one loudspeaker

EQ filter
10 parametric filter each in- and output (20), use as Bell, Shelving, Notch, or Allpass filter

X-Over
Butterworth, Bessel, Linkwitz-Riley

Limiter
In each input and output, the user have no access on the ouput limiter (components protection)

Long delay section
0 up to 800 ms (max. 275 m delay) in each input for the user

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 – 180°

Info