Technical Data
Modular-15sp
Speaker drivers
1 x 15″ Neodym woofer (LF) with 4″ voice coil, cone waterproof treatment
1 x 1,4″ Neodym compression driver (HF) with 3″ voice coil
System
2-way, scalable multi-functional loudspeaker
Frequency range 60°
60 Hz – 17,6 kHz (- 10 dB)
130 Hz – 17 kHz (+/- 3 dB)
Frequency range 90°
58 Hz – 17,8 kHz (- 10 dB)
122 Hz – 16.5 kHz (+/- 3 dB)
Coverage range (h x v)
90 x 60° / 60 x 40° (exchanging, arrayable and rotable horn)
Monitoring angle
50° and 20°
Impedance bi-amping
LF 8 Ω / HF 16 Ω
Powerhandling LF 8 Ω
850 W AES / 1.700 W programm / 3.400 W peak
Powerhandling HF 16 Ω
110 W AES / 220 W programm / 440 W peak
Sensitivity dB SPL 1 W/1 m
LF 100 db SPL / HF 111 db SPL
Sound pressure at (AES / programm / peak)
129 dB SPL / 132 dB SPL / 135 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT (all channels loop through), 1+/- HF, 2+/- LF
Handles
3 x shell type handle
Foot
8, each 4 x monitor site and bottom
Mounting
Easyfly mechanism for vertical and horizontal mounting
1 x back-facing Flying Track for safety cable
12 x M10 rigging points with 5 mm steel interior angles
1 x tilting pole socket +/- 18°, tilt for a stand or mounting pole
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
698 (h) x 431 (w) x 368 mm (d) / 32,9 kg
Integrated 2-Way Amplifier Modul
Amplifier
3rd Generation Class D
Power output CH1 LF
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω
Power output CH2 HF
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω
Amplifier gain
LF 32 dB, HF 26 dB
Signal-to-noise ratio
> 120 dB (A-Bewertet, 20 – 20.000 Hz, 8 Ω)
Damping factor
> 1.000 (8 Ω, 1 kHz)
Distortion
THD+N < 0,05 % (20 – 20.000 Hz, 8 Ω)
Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors
Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz
Integrated Loudspeaker Management System (DSP-Board)
Manual hand operation
2 button and 1 x digital encoder-wheel for the internal menu navigation, function lockable
Operable language
Selectable between English, German, France, Spain
Softwareconnection, bi-directional
USB, Ethernet
Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-amplifier in one network
Realtime software-monitoring for PC and MAC
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from the ampmodule
Real time meterbridge on PC per channel
Real time access for configuration
Speaker group building for access multiple speakers with one command
Display with software dimmable and switchable out
Standby switchable
Konfiguration und real-time monitoring über VA-WLAN Remotesoftware für PC und Mac
DSP preset memory quantity
80 Presets
Processor
64 bit, 96 kHz sample rate
Dynamic range input
120 dB
Maximum input level
+ 23 dB
Latency
0 – max. 500 microsecond
Routing
2-input signals can mix together in one loudspeaker
EQ filter
10 parametric filter each in- and output (20), use as Bell, Shelving, Notch, or Allpass filter
X-Over
Butterworth, Bessel, Linkwitz-Riley
Limiter
In each input and output, the user have no access on the ouput limiter (components protection)
Long delay section
0 up to 800 ms (max. 275 m delay) in each input for the user
Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase adjustment
0 – 180°
Modular-15
Speaker drivers
1 x 15″ Neodym woofer (LF) with 4″ voice coil, cone waterproof treatment
1 x 1,4″ Neodym compression driver (HF) with 3″ voice coil
System
2-way, scalable multi-functional loudspeaker
Frequency range 60°
60 Hz – 17,6 kHz (- 10 dB)
130 Hz – 17 kHz (+/- 3 dB)
Frequency range 90°
58 Hz – 17,8 kHz (- 10 dB)
122 Hz – 16.5 kHz (+/- 3 dB)
Coverage range (h x v)
90 x 60° / 60 x 40° (exchanging, arrayable and rotable horn)
Monitoring angle
50° and 20°
Impedance bi-amping
LF 8 Ω / HF 16 Ω
Powerhandling LF 8 Ω
850 W AES / 1.700 W programm / 3.400 W peak
Powerhandling HF 16 Ω
110 W AES / 220 W programm / 440 W peak
Sensitivity dB SPL 1 W/1 m
LF 100 db SPL / HF 111 db SPL
Sound pressure at (AES / programm / peak)
129 dB SPL / 132 dB SPL / 135 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT (all channels loop through), 1+/- HF, 2+/- LF
Handles
3 x shell type handle
Foot
8, each 4 x monitor site and bottom
Mounting
Easyfly mechanism for vertical and horizontal mounting
1 x back-facing Flying Track for safety cable
12 x M10 rigging points with 5 mm steel interior angles
1 x tilting pole socket +/- 18°, tilt for a stand or mounting pole
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
698 (h) x 431 (w) x 368 mm (d) / 27,9 kg
Paveosub-118
Speaker drivers
1 x 18″ Neodym long excursion woofer (LF) with 4″ voice coil, cone waterproof treatment
System
compact bass reflex subwoofer
Lower cut-off frequency
33 Hz (- 10 dB)
39 Hz (- 3 dB
Coverage range (h x v)
Omnidirectional
Impedance
8 Ω active separated
Powerhandling LF 8 Ω
1.200 W AES / 2.400 W programm / 4.800 W peak
Sensitivity dB SPL 1 W/1 m
100 dB SPL (half space)
Sound pressure at (AES / programm / peak)
131 dB SPL / 134 dB SPL / 137 dB SPL
Connectors
4 x Neutrik NL4 Speakon IN/OUT, 2+/- LF
Handles
6 x shell type handle
Foot
4 x with opposite stacking trays
Fittings
1 x M20 pole mount
2 x latches on the front for detachable wheelboard
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
540 (h) x 540 (w) x 740 mm (d) / 41 kg
Paveosub-118sp
Speaker drivers
1 x 18″ Neodym long excursion woofer (LF) with 4″ voice coil, cone waterproof treatment
System
compact bass reflex subwoofer
Lower cut-off frequency
33 Hz (- 10 dB)
39 Hz (- 3 dB
Coverage range (h x v)
Omnidirectional
Impedance
8 Ω active separated
Powerhandling LF 8 Ω
1.200 W AES / 2.400 W programm / 4.800 W peak
Sensitivity dB SPL 1 W/1 m
100 dB SPL (half space)
Sound pressure at (AES / programm / peak)
131 dB SPL / 134 dB SPL / 137 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT, 2+/- LF
Handles
6 x shell type handle
Foot
4 x with opposite stacking trays
Fittings
1 x M20 pole mount
2 x latches on the front for detachable wheelboard
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
540 (h) x 540 (w) x 740 mm (d) / 45,8 kg
Integrated 3-Way Amplifier Modul
Amplifier
3rd Generation Class D
Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω
Power output CH2 and CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω
Amplifier gain
CH1 32 dB, CH2/3 26 dB
Signal-to-noise ratio
> 120 dB (20 – 20.000 Hz, 8 Ω)
Damping factor
> 1.000 (8 Ω, 1 kHz)
Distortion
THD+N < 0,05 % (20 – 20.000 Hz, 8 Ω)
Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors
Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz
Integrated Loudspeaker Management System (DSP-Board)
Manual hand operation
2 button and 1 x digital encoder-wheel for the internal menu navigation, function lockable
Operable language
Selectable between English, German, France, Spain
Softwareconnection, bi-directional
USB, Ethernet
Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-amplifier in one network
Realtime software-monitoring for PC and MAC
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from the ampmodule
Real time meterbridge on PC per channel
Real time access for configuration
Speaker group building for access multiple speakers with one command
Display with software dimmable and switchable out
Standby switchable
Konfiguration und real-time monitoring über VA-WLAN Remotesoftware für PC und Mac
DSP preset memory quantity
80 Presets
Processor
64 bit, 96 kHz sample rate
Dynamic range input
120 dB
Maximum input level
+ 23 dB
Latency
0 – max. 500 microsecond
Routing
2-input signals can mix together in one loudspeaker
EQ filter
10 parametric filter each in- and output (20), use as Bell, Shelving, Notch, or Allpass filter
X-Over
Butterworth, Bessel, Linkwitz-Riley
Limiter
In each input and output, the user have no access on the ouput limiter (components protection)
Long delay section
0 up to 800 ms (max. 275 m delay) in each input for the user
Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase adjustment
0 – 180°
