Technical Data
HDSP-6A/6D Amplifier
Quantity channel
6 CH, class-D latest generation
Power output 4 Ω
8.000 W (2 x 2.400 W + 4 x 800 W)
Power output 8 Ω
4.960 W (2 x 1.580 W + 4 x 450 W)
Power output 16 Ω
2.400 W (2 x 800 W + 4 x 200 W)
Damping factor
> 1000 / 8 Ω, 1 kHz
Frequency responce
20 – 20.000 Hz
THD+N
< 0,05 % (20 – 20.000 Hz with 8 Ω)
Signal-to-noise ratio
> 118 dB (20 – 20.000 Hz with 8 Ω)
Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz
Powerconnector
1 x 16 A Neutrik PowerCon IN
Signal connection analog INPUT/LINK
4 x XLR female/male
Speaker Connections
4 x Speakon
Network connection
2 x Additional rear RJ45 socket for wired network in fixed installations
Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back
Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors
Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command
DSP sampling
64 bit, 96 kHz sample rate
DSP preset memory quantity
2 x 80 preset locations, including 2 different presets assignable simultaneously
Latency
0 – max. 500 microsecond
Dynamic range input
120 db
Nominal input level
+ 6 dbu
Maximum input level
+ 23 dbu
Limiter
Two per way, in each input and output
Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter
Long delay section
0 – 800 ms (max. 275 m delay) in each input
Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase adjustment
0 – 180°
X-Over
Butterworth, Bessel, Linkwitz-Riley Filter
Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC
Manual hand operation
with 4 x button and 2 x digital encoder-wheel in the internal menu navigation, function lockable
Display
2 x LED display
2 x LCD display with software dimmable and switchable
Body housing
19″/2 HE, 430 mm deep, strong black colored aluminum housing
Weight
7,2 kg
Modular-15
Speaker drivers
1 x 15″ Neodym woofer (LF) with 4″ voice coil, cone waterproof treatment
1 x 1,4″ Neodym compression driver (HF) with 3″ voice coil
System
2-way, scalable multi-functional loudspeaker
Frequency range 60°
60 Hz – 17,6 kHz (- 10 dB)
130 Hz – 17 kHz (+/- 3 dB)
Frequency range 90°
58 Hz – 17,8 kHz (- 10 dB)
122 Hz – 16.5 kHz (+/- 3 dB)
Coverage range (h x v)
90 x 60° / 60 x 40° (exchanging, arrayable and rotable horn)
Monitoring angle
50° and 20°
Impedance bi-amping
LF 8 Ω / HF 16 Ω
Powerhandling LF 8 Ω
850 W AES / 1.700 W programm / 3.400 W peak
Powerhandling HF 16 Ω
110 W AES / 220 W programm / 440 W peak
Sensitivity dB SPL 1 W/1 m
LF 100 db SPL / HF 111 db SPL
Sound pressure at (AES / programm / peak)
129 dB SPL / 132 dB SPL / 135 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT (all channels loop through), 1+/- HF, 2+/- LF
Handles
3 x shell type handle
Foot
8, each 4 x monitor site and bottom
Mounting
Easyfly mechanism for vertical and horizontal mounting
1 x back-facing Flying Track for safety cable
12 x M10 rigging points with 5 mm steel interior angles
1 x tilting pole socket +/- 18°, tilt for a stand or mounting pole
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
698 (h) x 431 (w) x 368 mm (d) / 27,9 kg
Paveosub-118
Speaker drivers
1 x 18″ Neodym long excursion woofer (LF) with 4″ voice coil, cone waterproof treatment
System
compact bass reflex subwoofer
Lower cut-off frequency
33 Hz (- 10 dB)
39 Hz (- 3 dB
Coverage range (h x v)
Omnidirectional
Impedance
8 Ω active separated
Powerhandling LF 8 Ω
1.200 W AES / 2.400 W programm / 4.800 W peak
Sensitivity dB SPL 1 W/1 m
100 dB SPL (half space)
Sound pressure at (AES / programm / peak)
131 dB SPL / 134 dB SPL / 137 dB SPL
Connectors
4 x Neutrik NL4 Speakon IN/OUT, 2+/- LF
Handles
6 x shell type handle
Foot
4 x with opposite stacking trays
Fittings
1 x M20 pole mount
2 x latches on the front for detachable wheelboard
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
540 (h) x 540 (w) x 740 mm (d) / 41 kg
Info
The SubSat-15 set consists of two HDSP-6 system amplifier, four Paveosub-118’s and two Modular-15’s bi-amping. It is possible to connect another 2 Modular-15’s. There are still 4 x 800 W channels available on one HDSP-6. These channels can be used for flexible monitors, nearfills, delay lines or zoning.
The HDSP-6 system amplifiers is the heart of the Voice Acoustic sound systems. Specific settings are stored as presets on all speakers. These can be selected and loaded via the front panel Display. The system is ‘Plug and Play’. Plug it in, and it is ready for use. All components are matched, adjusted and limited via the integrated speaker management system (DSP). The sound is synchronised right away, without having to make further adjustments.
Experienced technicians and professional audio operator can still alter the functions and have access capabilities to the DSP settings. Access to almost all parameters without PC control can be made using the Display buttons and encoder wheel. The functions can be password protected obviating unauthorized interference. Complex configurations can be comfortably created via the Ethernet, or an integrated bi-directional wireless interface on the PC surface, using the VA-WLAN remote software for PC and Mac. Individual sound ideas and alterations can be saved as presets and recalled at any time.
Components of this set can be used arbitrarily depending on the requirements of the relevant events e.g. Modular-15 Set stand alone as a full-range speaker, combined with a bass to round out the sound image, or full configuration with two basses per top to deliver clean and punchy sound to several hundred people. The SubSat-15 Set sounds balanced at all volume levels: powerful, transparent and fine resolution. The range of the SubSat-15 set is vast, both through the vertical plane, and the tight bundling of the large 60°x 40° or optional 90°x 40° horn. Speech intelligibility is also perfect at a distance. Both speech and vocals are clear and understandable in larger and rectangular spaces.
The operator can change the angle of both the 90° x 50° horn and the 60° x 40° horn, through the bi-amping control, depending on the sound requirements of the area being used.
The HDSP-6 corresponding settings are stored for both horns. The 15″ chassis used in the Modular-15 is designed for a clean midrange at highest volume levels. It has a very low moving mass and an extremely strong neodymium magnet.
The patented array design of the tops heads minimizes interference between the sound sources. Two or more systems can also provide a great combined PA. This multiple usage factor provides the user with an even wider range with only one speaker system.
The possible extensions, scaling, ease of use, and extensive utilitarian accessories, complete the SubSat-15 set and make it a universal PA tool.