Technical Data
HDSP-3A/3D Amplifier
Quantity channel
3 CH, class-D latest generation
Power output 4 Ω
4.000 W (1 x 2.400 W + 2 x 800 W)
Power output 8 Ω
2.480 W (1 x 1.580 W+ 2 x 450 W)
Power output 16 Ω
1.200 W (1 x 800 W+ 2 x 200 W)
Damping factor
> 1000 / 8 Ω, 1 kHz
Frequency responce
20 – 20.000 Hz
THD+N
< 0,05 % (20 – 20.000 Hz with 8 Ω)
Signal-to-noise ratio
> 118 dB (20 – 20.000 Hz with 8 Ω)
Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz
Powerconnector
1 x 16 A Neutrik PowerCon IN
Signal connection analog INPUT/LINK
2 x XLR female/male
Speaker Connections
2 x Speakon
Network connection
1 x Additional rear RJ45 socket for wired network in fixed installations
Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back
Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors
Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command
DSP sampling
64 bit, 96 kHz sample rate
DSP preset memory quantity
80 preset locations
Latency
0 – max. 500 microsecond
Dynamic range input
120 db
Nominal input level
+ 6 dbu
Maximum input level
+ 23 dbu
Limiter
Two per way, in each input and output
Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter
Long delay section
0 – 800 ms (max. 275 m delay) in each input
Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase adjustment
0 – 180°
X-Over
Butterworth, Bessel, Linkwitz-Riley Filter
Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC
Manual hand operation
with 2 x button and 1 x digital encoder-wheel in the internal menu navigation, function lockable
Display
1 x LED display
1 x LCD display with software dimmable and switchable
Body housing
19″/2 HE, 430 mm deep, strong black colored aluminum housing
Weight
4,1 kg
Modular-10
Speaker drivers
1 x 10″ Neodym woofer (LF) with 2,5″ voice coil, cone waterproof treatment
1 x 1″ Neodym compression driver (HF) with 1,7″ voice coil
System
2-way, scalable multi-functional loudspeaker
Frequency range
70 Hz – 22 kHz (- 10 dB)
107 Hz – 21 kHz (+- 3 dB)
Coverage range (h x v)
90° x 40° (arrayable and rotable horn)
Monitoring angle
50° and 20°
Impedance bi-amping
LF 8 Ω / HF 8 Ω
Powerhandling LF 8 Ω
350 W AES / 700 W programm / 1.400 W peak
Powerhandling HF 16 Ω
50 W AES / 100 W programm / 200 W peak
Sensitivity dB SPL 1 W/1 m
100 dB SPL
Sound pressure at (AES / programm / peak)
125 dB SPL / 128 dB SPL / 131 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT, 1+/- HF, 2+/- LF, passive 1+/1-
Handles
3 x shell type handle
Foot
7, each 4 x monitor site and 3 x bottom
Mounting
2 x Easyfly mechanism for vertical and horizontal Mounting
1 x back-facing Flying Track for safety cable
8 x M10 rigging points with 5 mm steel interior angles
2 x M6 point on the back side for adjustable wall holder
1 x tilting pole socket +/- 18°, tilt for a stand or mounting pole
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
520 (h) x 321 (w) x 267 mm (d) / 15,3 kg
Paveosub-115
Speaker drivers
1 x 15″ Neodym long excursion woofer (LF) with 4″ voice coil, cone waterproof treatment
System
compact and flat bass reflex subwoofer
Lower cut-off frequency
34 Hz (- 10 dB)
45 Hz (- 3 dB)
Coverage range (h x v)
Omnidirectional
Impedance
8 Ω active separated
Powerhandling LF 8 Ω
1.200 W AES, 2.400 W programm, 4.800 W peak
Sensitivity dB SPL 1 W/1 m
98 dB SPL (half space)
Sound pressure at (AES / programm / peak)
129 dB SPL / 132 dB SPL / 135 dB SPL
Connectors
4 x Neutrik NL4 Speakon IN/OUT, 2+/- LF
Handles
2 x shell type handle
Foot
8, each 4 x on a flat and narrow side with opposite stacking trays
Fittings
2 x M20 pole mount
2 x latches on the front for detachable wheelboard
Housing
30 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
360 (h) x 540 (w) x 570 mm (d) / 27 kg
Info
The SubSat-10 set is the standard configuration of a HDSP-3 amplifier. It consists of two Paveosub-115 plus two Modular-10.
The system is ‘Plug and Play’. Plug it in, and it is ready for use. All components are matched, adjusted and limited via the integrated speaker management system (DSP). The sound is synchronised right away, without having to make further adjustments. Access to almost all parameters without PC control can be made using the Display buttons and encoder wheel. Complex configurations can be comfortably created via the Ethernet, or an integrated bi-directional wireless interface on the PC surface, using the VA-WLAN remote software for PC, Mac and as App. Individual sound ideas and alterations can be saved as presets and recalled at any time.
The SubSat-10 set offers a ‘not-yet-achieved’ performance in the compact class. The high efficiency of the speakers, in conjunction with the high powered amplifier, achieves a sound pressure which previously could only be obtained with considerably larger systems. This system has enough power for use in small venues and can also achieve an excellent acoustic irradiation of events consisting of several hundred people.
The SubSat-10 set sounds balanced at all volume levels: powerful, transparent and fine resolution.
The range of the Modular-10 Set is vast, both through the vertical plane, and the tight bundling of the large 60° x 40° or optional 90° x 40° horn. Speech intelligibility is also perfect at a distance. Both speech and vocals are clear and understandable in larger and rectangular spaces.
Special emphasis has been placed on an even and clean coverage of the Modular-10 Set. The top unit is designed so that the frequency response is linear and without constrictions even outside the main axis of radiation. The sound is thus almost identical anywhere in front of the speaker. The patented array design of the tops heads minimizes interference between the sound sources. Two or more systems can also provide a great combined PA. This multiple usage factor provides the user with an even wider range with only one speaker system.
The possible extensions, scaling, ease of use, and extensive utilitarian accessories, complete the SubSat-10 set and make it a universal PA tool.
