Technical Data
HDSP-6A/6D Amplifier
Quantity channel
6 CH, class-D latest generation
Power output 4 Ω
8.000 W (2 x 2.400 W + 4 x 800 W)
Power output 8 Ω
4.960 W (2 x 1.580 W + 4 x 450 W)
Power output 16 Ω
2.400 W (2 x 800 W + 4 x 200 W)
Damping factor
> 1000 / 8 Ω, 1 kHz
Frequency responce
20 – 20.000 Hz
THD+N
< 0,05 % (20 – 20.000 Hz with 8 Ω)
Signal-to-noise ratio
> 118 dB (20 – 20.000 Hz with 8 Ω)
Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz
Powerconnector
1 x 16 A Neutrik PowerCon IN
Signal connection analog INPUT/LINK
4 x XLR female/male
Speaker Connections
4 x Speakon
Network connection
2 x Additional rear RJ45 socket for wired network in fixed installations
Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back
Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors
Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command
DSP sampling
64 bit, 96 kHz sample rate
DSP preset memory quantity
2 x 80 preset locations, including 2 different presets assignable simultaneously
Latency
0 – max. 500 microsecond
Dynamic range input
120 db
Nominal input level
+ 6 dbu
Maximum input level
+ 23 dbu
Limiter
Two per way, in each input and output
Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter
Long delay section
0 – 800 ms (max. 275 m delay) in each input
Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase adjustment
0 – 180°
X-Over
Butterworth, Bessel, Linkwitz-Riley Filter
Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC
Manual hand operation
with 4 x button and 2 x digital encoder-wheel in the internal menu navigation, function lockable
Display
2 x LED display
2 x LCD display with software dimmable and switchable
Body housing
19″/2 HE, 430 mm deep, strong black colored aluminum housing
Weight
7,2 kg
Ikarray-8
Speaker drivers
2 x 8″ Neodym LF with 65 mm (2,5″) voice coil
4 x 1″ Neodym compression driver with 44 mm (1,75″) voice coil
System
Plug&Play Line-Array with passive crossover
Frequency range 15°
80 Hz – 18 kHz (- 10 dB)
117 Hz – 16 kHz (+/- 3 dB)
Frequency range 5°
80 Hz – 19 kHz (- 10 dB)
117 Hz – 16 kHz (+/- 3 dB)
Coverage range (h x v)
100° x 15° or 100° x 5° depending on the housing version
Powerhandling 4 Ω
500 W AES / 1.000 W programm / 2.000 W peak
Sensitivity dB SPL 1 W/1 m
15° : 104 dB SPL
5° : 106 dB SPL
Sound pressure at (AES / programm / peak)
15° : 131 dB SPL / 134 dB SPL / 137 dB SPL
5° : 133 dB SPL / 136 dB SPL / 139 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN and OUT, 1+/1-
Handles
4 x shell type handle
Mounting
Toolless flight mechanics with tripod option
Housing
12 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
Optional for fixed installations: other surface colors according to RAL-tones can be provided by Warnex structure paint
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
465 (h) x 513 (w) x 291 mm (d) / 26,2 kg
Paveosub-118
Speaker drivers
1 x 18″ Neodym long excursion woofer (LF) with 4″ voice coil, cone waterproof treatment
System
compact bass reflex subwoofer
Lower cut-off frequency
33 Hz (- 10 dB)
39 Hz (- 3 dB
Coverage range (h x v)
Omnidirectional
Impedance
8 Ω active separated
Powerhandling LF 8 Ω
1.200 W AES / 2.400 W programm / 4.800 W peak
Sensitivity dB SPL 1 W/1 m
100 dB SPL (half space)
Sound pressure at (AES / programm / peak)
131 dB SPL / 134 dB SPL / 137 dB SPL
Connectors
4 x Neutrik NL4 Speakon IN/OUT, 2+/- LF
Handles
6 x shell type handle
Foot
4 x with opposite stacking trays
Fittings
1 x M20 pole mount
2 x latches on the front for detachable wheelboard
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
540 (h) x 540 (w) x 740 mm (d) / 41 kg
Info
The Ikarray-8 set consists of one HDSP-6 system amplifier, four Paveosub-118’s and each two Ikarray-8 /100° x 15° and 100° x 5°.
The HDSP-6 system amplifiers is the heart of the Voice Acoustic sound systems. Specific settings are stored as presets on all speakers. These can be selected and loaded via the front panel Display.
The Ikarray-8 is a novel concept plug&play line-array with incredible power densitity: 2 x 8″ and 4 x 1″ drivers are stacked vertically in a compact housing. Few elements of this system are needed to achieve acoustically effective length and great range. It closes the gap between conventional loudspeakers and line-arrays.
Contrary to conventional line-arrays there is no need for the user to deal with simulation software, splay angles, rigging hardware and DSP filters. Ikarray-8 comes precurved and elements are simply connected to each other at fixed angles. For greater flexibility and scalability array elements will be available with 5°x 100° and 15°x 100° directivity pattern. This way, several units can be connected without vertical coverage becoming too big. This results in higher achievalble SPL and headroom compared to other fixed-angle system which are limited to fewer elements.
The continuous steel rigging system is concealed within the cabinet and there are no protruding metal parts. This imparts the system with an elegant and unobtrusive appearance, suitable for sophisticated demands in mobile and especially installation application. Stacking feet and their corresponding slots allow immediate and easy cabinet alignment and connection via ball lock bolt. 4 handles provide optimum handling.
Ikarray-8 comes with an innovative 2-in-1 rigging and polemount hardware. For either use it can be fixed without tools on the top or bottom of the cabinet. A slider with threaded spindle allows for continuous tilting without the center of gravity shifting forward or backward. It stays centered on the polemount and the array does not become top-heavy.
The 8″ woofers have been recessed to optimize the time alignment for the passive crossover. On the other hand the recess has been used to provide the woofers with additional horn loading. The horn flare also makes sure that criteria for a coherent wavefront are met by forming a narrow rectangular outlet.
Voice-Acoustic HDSP system amplifiers and self-powered subwoofers contain presets for all 5° and 15° combinations and guarantee optimum performance.
