Technical Data
HDSP-6A/6D Amplifier
Quantity channel
6 CH, class-D latest generation
Power output 4 Ω
8.000 W (2 x 2.400 W + 4 x 800 W)
Power output 8 Ω
4.960 W (2 x 1.580 W + 4 x 450 W)
Power output 16 Ω
2.400 W (2 x 800 W + 4 x 200 W)
Damping factor
> 1000 / 8 Ω, 1 kHz
Frequency responce
20 – 20.000 Hz
THD+N
< 0,05 % (20 – 20.000 Hz with 8 Ω)
Signal-to-noise ratio
> 118 dB (20 – 20.000 Hz with 8 Ω)
Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 – 135 V = 110 / 115 / 120 V Betrieb, 190 – 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz
Powerconnector
1 x 16 A Neutrik PowerCon IN
Signal connection analog INPUT/LINK
4 x XLR female/male
Speaker Connections
4 x Speakon
Network connection
2 x Additional rear RJ45 socket for wired network in fixed installations
Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back
Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors
Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command
DSP sampling
64 bit, 96 kHz sample rate
DSP preset memory quantity
2 x 80 preset locations, including 2 different presets assignable simultaneously
Latency
0 – max. 500 microsecond
Dynamic range input
120 db
Nominal input level
+ 6 dbu
Maximum input level
+ 23 dbu
Limiter
Two per way, in each input and output
Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter
Long delay section
0 – 800 ms (max. 275 m delay) in each input
Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Phase adjustment
0 – 180°
X-Over
Butterworth, Bessel, Linkwitz-Riley Filter
Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC
Manual hand operation
with 4 x button and 2 x digital encoder-wheel in the internal menu navigation, function lockable
Display
2 x LED display
2 x LCD display with software dimmable and switchable
Body housing
19″/2 HE, 430 mm deep, strong black colored aluminum housing
Weight
7,2 kg
CXN-16
Speaker drivers
4 x 8″ Neodym woofer (LF) with 2,5″ voice coil, cone waterproof treatment
1 x 1,4″ Neodym compression driver (HF) with 3″ voice coil
System
High Performance Monitor
Frequency range – 10 dB
63 Hz – 17,3 kHz
Frequency range +/- 3 dB
80 Hz – 14 kHz
Coverage range (h x v)
40 x 60° lying as monitor
60 x 40° flown or mounted on a tripod
Monitoring angle
50° and 10°
Impedance bi-amping
LF 8 Ω / HF 16 Ω
Powerhandling LF 8 Ω
1.000 W AES / 2.000 W programm / 4.000 W peak
Powerhandling HF 16 Ω
110 W AES / 220 W programm / 440 W peak
Sensitivity dB SPL 1 W/1 m
LF 101 dB SPL / HF 111 dB SPL
Sound pressure at (AES / programm / peak)
131 dB SPL / 134 dB SPL / 137 dB SPL
Connectors
2 x Neutrik NL4 Speakon IN/OUT (all channels loop through), 1+/- HF, 2+/- LF
Handles
2 x shell type handle
Foot
4 x bottom
Mounting
1 x Easyfl y mechanism for vertical and horizontal Mounting
1 x back-facing Flying Track for safety cable
4 x M10 rigging points with 5 mm steel interior angles
1 x tilting pole socket +/- 18°, tilt for a stand or mounting pole
Optional U-bracket for wall mounting
Housing
24 and 15 mm birch plywood CNC machine-splined and bolted
Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days
Front grille
Galvanized and powdered black 2 mm honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks
Dimensions / Weight
360 (h) x 540 (w) x 540 mm (d) / 25,6 kg
Info
The HDSP-6 system power amplifiers are the heart of the Voice Acoustic monitoring system.
The system is ‘Plug and Play’. Plug it in, and it is ready for use. All components are matched, adjusted and limited via the integrated speaker management system (DSP). The sound is synchronised right away, without having to make further adjustments.
The CXN-16 is a multi-functional bi-amping high performance monitor. It’s appealing rounded shape let it integrate easily in any venue in an elegant and unobtrusive way. A small footprint and outstanding performance go hand in hand and make sure it is always a perfect choice no matter if it’s a confined stage or the biggest venue. The CXN-16 has the world’s best size-weight-power ratio: 540 x 540 x 360 mm, 26 kg, 1.000 W AES, 101 db Sensitivity.
4 x 8″ equals 16″ and surpasses the capabilities of standard 15″ designs. Four separate 2,5″ woofer voice coils plus a dedicated 3″ horndriver provide much more space for heat dissipation and reduce powercompression. Amplifier power is used more efficiently.
The rugged grille is made from 2 mm steel and it’s curved shaped is reinforced by welded bracings on each side and additional support in the middle on top of the horn. It is hardwearing of course. A small tunnel on the bottom allows cabling to be routed through beneath the monitor. A tilting pole socket, the popular Easyfly mechanism and a flying track for safety cable make CXN-16 into a multifunctional tool for professionals.